DIY Fabric Owl Coasters
With the Home Decor Lab Starting tonight I thought I would share a project that we’ll be working on in class tonight.
I found the most adorable Owl Coasters tutorial online at Curbly.com. She makes them a similar way to the way we’ll be making them in class tonight, and added an adorable owl applique, so I thought might share this easy how-to with you:
How to Sew a Fab Fabric Coaster!
Jox at The Knitted Blog requested an appliqued coaster tutorial, and I’m happy to oblige. Keep in mind that I’m completely self-taught, so just because I do it a certain way, that does not necessarily mean it’s the “right” way to do it! But I’ve established a way that works well for me, which I’m happy to share.
1. Cut two pieces of 4.5″x4.5″ fabric and one piece of 4.5″x4.5″ batting. Set aside.
2. Draw or trace a pattern or shape in reverse onto the liner of your double stick fusible web. (First check to see which side of the liner you should draw on by peeling it apart slightly at the corner. You will draw on the side of the liner that’s still attached to the web.)
3. Peel off and discard the side of the tracing paper that you did not draw on. Stick the remaining side to the wrong side of a piece of fabric (it will not permanently stick until you iron it into place, so reposition as necessary).
4. Cut the fusible web and the fabric together along the line that you drew.
5. Peel off and discard the remaining side of the tracing paper, ensuring that the web stays stuck to the fabric.
6. Place the shape — web-side down — onto the right side of one of the pre-cut 4.5″x4.5″ pieces of fabric. Reposition as necessary. When you’re happy with the placement, iron it permanently into place by pressing for 10-15 seconds.
7. Repeat steps two through six as necessary until you’re done with your applique design.
8. Stack your three 4.5″x4.5″ pieces: batting on the bottom, one piece of fabric in the middle with the right side facing up, and one piece of fabric on top with the right side facing down. (This picture is set up just to show you which way each piece of fabric should face. When you’re ready to sew the three pieces together, they should be stacked one directly on top of the other and pinned together.)
9. Sew all three pieces together with a .25″ seam allowance, leaving a 1.5″ opening so you can turn the coaster inside-out. Trim the corners as shown.
10. Turn the coaster inside-out, ensuring that the layer of batting is on the inside, between the two layers of fabric. Gently push the corners out using a knitting needle or a chopstick. Hand stitch the 1.5″ opening.
11. Put something hot or cold on your new coaster. Repeat step 11 as neccessary.
